Wiki Navigation
- Loading...
Introduction
Some TV/Radio channels have different sound volumes and its annoying to change the volume everytime again and again and again. MyVolume saves the sound volume of each TV and Radio channel (internet streams as well) and load them on switching.
How to use MyVolume
User with an external AV-Receiver choose...
Press save and close.
With the the option "external AV-Receiver", you can set the individual sound volume for each channel inside of MP(every time you change the sound level MyVolume stores the value). And with the sound control of your AV-Receiver, you control the master volume.
User without an external AV-Receiver choose...
If it's your first time or you want to adjust your channel volume for each channel. Then follow these steps.
Step 1: Enable the "learning mode" (Press save and close.)
Step 2: zap through all channels and set your max sound volume
Step 3: Disable the "learning mode" (Press save and close.)
Now you can change the Master Volume inside of MP and all channels load the relative sound volume to the Master Volume. Means, you control the volume as supplied before, but now with the correct loudness for each channel. MyVolume will store the sound level in MediaPortal mode only when "learning mode" is activated.
Configuration
delay on stop
You can set a delay timer. The timer starts when nothing is played. When the timer expired MyVolume will load the "Default volume", the "Default volume" is the volume MP was started with.
consider streams
MyVolume save the volume for internet streams on a stream basis
Thread
//forum.team-mediaportal.com/mediaportal-plugins-47/myvolume-plugin-54330/
This page has no comments.